• This sauna does not include ozone, so we recommend using a spa additive like OxyShock weekly. Please follow the product's instructions for proper dosing and application. OxyShock can be found at your local Bunnings.

• Clean the filter weekly using high-pressure water from a garden hose to ensure optimal performance.

• The recommended filters are above 20 micron woven filters. These can be ordered directly through us at Rejuvenex. Please contact us to place an order.

• Change the filter every 3 months, or more frequently depending on ice bath use.

• When not in use, ensure the lid is closed. This will help maintain the water to be cooler and cleaner.
  

• For optimal hygiene and sauna experience, we recommend showering before each use to ensure cleanliness.

• Main filter & pre-filter: Clean weekly. The water flow on the screen should be above 20 LPM if the filter is cleaned properly or a new cartridge is installed. The pre-filter is located behind the main filter when you unscrew the hex nut (please be sure not to over-tighten it).

• Fan filter: Clean every 2 to 3 months. If it's in good condition at the 2-month mark, you can check it again at 3 months and clean if needed.

• Lid usage: We recommend keeping the lids on the baths when not in use, as the room temperature is quite hot, and keeping the lid off significantly reduces cooling efficiency. This forces the compressor to work harder.
  

Please note that future warranty work may be voided if maintenance is not kept up to the required standards.